Hardware - Other versions
miniLA by Bob Grieb
This version of the miniLA PCB integrates both LPT and USB interfaces on one board.
Schematic is shown on the picture below.
The tool used for schematic is TinyCAD and PCB was designed in FreePCB.
For further informations see README (part of whole design package).
You can also use our mailing-list or directly contact the author of this PCB version at rlgrieb<at>verizon.net
Pictures
) top side |
Downloads:
Schematic: 
PDF
Whole package (schematic, PCB, device placement): 
ZIP